The Taco Hy-Vent has become the industry standard for dependable long life service. The high capacity float style vents can be placed either on the boiler or at the high points throughout the system. Now with operating pressure ratings of up to 150 PSI, the brass body, nickel plated vents meet the system requirements of even the largest installation. The vents are also easily serviceable if needed, by just unscrewing the vent cap.
Air Vents 64
The Taco Hy-Vent has become the industry standard for dependable long life service. The high capacity float style vents can be placed either on the boiler or at the high points throughout the system. Now with operating pressure ratings of up to 250 PSI, the brass body, nickel plated vents meet the system requirements of even the largest installation. The vents are also easily serviceable if needed, by just unscrewing the vent cap.
Market Price
$39.36
Old Number FV180
150 PSI maximum operating pressure - 240 degrees maximum temperature
High temperature polypropylene float - 3-1/4 inches high - 1-27/32 inches diameter
Market Price
$11.00
Lambro Under Eave Vent, 4 in Dia, 5-3/4 in Length, 3-1/4 in Width, Plastic, White, Domestic
Market Price
$10.00
Chrome plated brass body - Automatic operation - Can be operated manually by rotating knob - For hydronic heating systems or low pressure steam - 150 PSI maximum working pressure - 212 degrees maximum working temperature - 15 PSI maximum steam pressure
Market Price
$28.30
Brass body - 150 PSI maximum working pressure - 40 PSI maximum discharge pressure - 1.75 SCFM maximum discharge rate - 230 degrees maximum working temperature
Market Price
$2011.61
FOR GAS OR OIL - MUST USE CONTROL KIT SOLD SEPERATELY
Market Price
$586.00
Market Price
$48.02
Features
- Heavy Gauge Galvalume(R) Steel Body
- PPG Envirocron(R) Powder Coating in White, Tan or Brown
- Lighter Weight Galvalume(R) Damper (Lighter to Minimize Restriction)
- Intrusion Prevention Balanced Damper Magnets
- Quiet Closing Rubber Damper Bumpers
Market Price
$78.80
For solar fluid - Brass chrome plated body - 150 PSI maximum working pressure - 75 PSI maximum discharge pressure - Minus 20 to 360 degrees working temperature range
Market Price
$157.41
Market Price
$2265.82
FOR GAS OR OIL - MUST USE CONTROL KIT SOLD SEPARATELY
Market Price
$391.00
Brass body and cover with stainless steel internal components - 3/8 inch FIPS top discharge - 230 PSI maximum working pressure - 90 PSI maximum discharge pressure - 9 SCFM maximum discharge rate - Minus 4 to 250 degrees working temperature range
Market Price
$59.90
Brass body - 150 PSI maximum working pressure - 60 PSI maximum discharge pressure - 2.5 SCFM maximum discharge rate - 250 degrees maximum working temperature
Installed on water or stream radiators the Taco automatic coin vent is the ideal air purging device. The coin vent features special hygroscopic cellulose discs in the valve body. When dry the discs allow air to be released from the system. Once all the air is purged the discs would then come in contact with system water, where upon they would swell to create a positive shut-off. This continuous cycle prevents the radiators from becoming air bound and speeds the process of filling the system. The vent can also be manually shut off by means of an internal ball check. The 417 coin vent is suitable for use in water and low pressure steam applications.
Market Price
$122.00
Includes shut off valve, brass piping tee, and brass compression couplings
Market Price
$1422.55
Field Controls, 46275400, Power Venter, 115 V, 1.7 A, 138 W Power, 3000 rpm Speed
Market Price
$1.89
Market Price
$26.00
Brass body - 150 PSI maximum working pressure - 90 PSI maximum discharge pressure - 1.75 SCFM maximum discharge rate - 240 degrees maximum working temperature
Market Price
$52.00
This 1/8 inch high capacity air vent includes a manual vent feature and is used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with female NPT connection, brass cover, air vent with silicone rubber seal, shutter, polyethylene float with valve plug, automatic vent with black cap, and manual vent with red cap. It has a high capacity and high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can be disassembled for inspection and cleaning. The maximum pressure is 150 psi
Market Price
$22.50
Amtrol® Air Vent, Float, 1/8 in Inlet, 1/8 in Outlet, 150 psi Maximum, 230 deg F, 2 in Width, 3-5/8 in Height, Brass
Market Price
$20.83
Old Number FV147
150 PSI maximum operating pressure - 240 degrees maximum temperature
High temperature polypropylene float - 2 inches high - 1-5/32 inches diameter
Market Price
$1774.39
Overview
Patented SWG or ComboVent Power Venters are ETL and cETL listed for all LP gas, natural gas, or oil-fired heating equipment. The SWG or ComboVent combines the motor, blower, and vent hood in one complete, easy to install unit. The SWG mounts on the outside of the building and pulls the combustion gases from the appliance through the outside wall utilizing 100% negative pressure.
Features
- 100% negative pressure in the vent pipe for maximum safety.
- Standard galvanized pipe can be used instead of expensive stainless steel.
- No need to seal vent pipe joints, saving time and money.
- Significantly longer vent lengths than positive pressure, direct vent systems.
- The SWG or ComboVent is recommended by major heating appliance manufacturers.
The Taco Hy-Vent has become the industry standard for dependable long life service. The high capacity float style vents can be placed either on the boiler or at the high points throughout the system. Now with operating pressure ratings of up to 150 PSI, the brass body, nickel plated vents meet the system requirements of even the largest installation. The vents are also easily serviceable if needed, by just unscrewing the vent cap.
Market Price
$176.53
Market Price
$21.00
Brass body - 150 PSI maximum working pressure - 40 PSI maximum discharge pressure - 1.75 SCFM maximum discharge rate - 230 degrees maximum working temperature
Market Price
$398.23
Market Price
$42.00
This 1/8 inch automatic air vent valve is used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with male NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. It has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. It can be disassembled for inspection and cleaning. The maximum pressure is 150 psi
Market Price
$1782.33
FOR GAS OR OIL - MUST USE CONTROL KIT SOLD SEPARATELY
Market Price
$2580.85
FOR GAS OR OIL - MUST USE CONTROL KIT SOLD SEPARATELY
The Taco 409 air vent is a heavy duty brass vent rated to 150 psi system operating pressure. The conical shapeof the vent significantly increases the clearance between the water level and internal mechanisms, reducing the potential that dirt floating on the top of the water could foul the venting operation. It features a convenient outlet connection for a 3/4 ID flex tube waste connection. It’s high capacity design makes it ideal for placement throughout commercial systems
Market Price
$99.00
Market Price
$126.12
Two way air vent that filters air in both directions - For use on septic systems and lift stations - For outdoor use only - Fits 3 inch or 4 inch pipe
Market Price
$343.00
Specially designed to terminate Tjernlund Side Wall Vent Systems. They are also an approved method of terminating many horizontally vented appliances. Vent hoods feature heavy duty, corrosion resistant aluminum construction. Models VH1-3, 4 and 6 also have an additional heat shield for built in clearances from combustibles. Building exteriors are kept clean while the aesthetics of the structure remain undisturbed. All mounting hardware is included.
Tjernlund Vent Hood, Series: VH1, Aluminum, Domestic
Market Price
$121.00
Brass body with stainless steel float guide pin and linkage - 150 PSI maximum working pressure - 90 PSI maximum discharge pressure - 4.5 SCFM maximum discharge rate - 250 degrees maximum working temperature
Market Price
$52.00
This automatic air vent valve is used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with male NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. It has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. It can be disassembled for inspection and cleaning. The maximum pressure is 150 psi
Market Price
$404.05
Brass body - 150 PSI maximum working pressure - 90 PSI maximum discharge pressure - 1.75 SCFM maximum discharge rate - 240 degrees maximum working temperature
This 1/2 inch automatic vent valve is used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with female NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. It has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. It can be disassembled for inspection and cleaning. The maximum pressure is 150 psi
Series FV-4 Automatic Vent Valves are used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with female NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. Series FV-4M1 has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. Can be disassembled for inspection and cleaning. Maximum Pressure: 150psi
Market Price
$4424.51