Diffusers
Registers
Fittings
Fireproofing Caulk
Air Duct Fittings
Grilles
Market Price
$68.05
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Search results for
All Products
685
products found manufactured by Rectorseal
Relevant Product Categories
Market Price
$15.12
Not for use in continuous vibration environments - Not for exterior, underwater or wet area use - Single component, general purpose fire rated sealant, draft stop and smoke seal for construction joints and through the wall penetrations - Water based
Market Price
$24.33
Thin walled trap for light duty applications - Transparent trap is easy to clean and inspect - Watertight red caps provide easy access for cleaning - Includes cleaning brush
Market Price
$10.88
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$24.97
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$49.04
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$67.28
Higher switching capacity with microswitch technology - Transparent trap is easy to clean and inspect - Watertight red caps provide easy access for cleaning - Float switch warns of blockage and shuts down the AC unit - Includes cleaning brush
Market Price
$26.83
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$25.70
For use on metal or plastic secondary drain pans - Pull up test knob - Protective cover - Easy drill free installation - Normally closed or normally open - Magnetic trigger system - Vertical trigger depth of 3/4 inch - 24 volts
Market Price
$19.19
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$46.34
Old number MV3
Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Stepped collar for use with 6 inch, 7 inch, and 8 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
Market Price
$27.64
TRUaire™ Adjustable Bar Type Supply Registers deliver high capacity airflow, with style, and solid construction. There are three different models to choose from, and all feature SmoothGlide™ Technology, pristine white powder coat finish, and recessed screw holes. All three also offer options. These include: choice of vertical or horizontal blade positioning, and a choice to add our exclusive SmoothGlide™ Multi-Shutter Damper, our SmoothGlide™ Opposed Blade Damper, or no damper at all.
TRUaire™ Ceiling/Sidewall Register, 1-Way, Series: 210 Series, 12 x 4 in, 3-1/2 in Duct Height, 13-3/4 in Overall Width, 2-1/4 in Overall Depth, Adjustable Vertical Blade, 95 to 480 cfm, 34 sq-in, 3/4 in Blade Spacing, Steel, Powder Coated, Import
Market Price
$76.53
Snap together design - Weather and fire resistant - UV stabilized - Rigid construction - Wider design allows for multiple linesets under one cover - Deeper profile allows thicker insulation
Market Price
$11.50
TRUaire's Stamped Steel Supply Registers are made of quality steel, and feature our exclusive SmoothGlide Technology, which powder coats every piece, prior to assembly, something no other register and grille manufacturer offers in the industry. TRUaire offers two series model types; 100 are the standard, 400 have stamped curved blades. Both models feature countersunk screw holes, a pristine white powder coat finish, and the economical price that comes with using steel. Our curved blade Steel Supply Registers (400) simply provides a classier look, and a more even air pattern. The choice is yours to make.
TRUaire™ Wall/Ceiling Register, 2-Way, Series: 132, 10 x 4 x 1-3/4 in, 45 to 145 cfm, 24 sq-in Effective Area, 55 deg Deflection, 1/3 in Blade Spacing, Steel, White Powder Coated, Import
Market Price
$37.34
3/4 inch male PVC adapter - Switch can be normally open or normally closed - 1/4 inch trigger depth - Includes 6 feet of control wire with 4th wire for alarm - 24 volt AC solid state sensor with water detection LED light - Includes 14 vibration isolators
Market Price
$12.28
TRUaire's Stamped Steel Supply Registers are made of quality steel, and feature our exclusive SmoothGlide Technology, which powder coats every piece, prior to assembly, something no other register and grille manufacturer offers in the industry. TRUaire offers two series model types; 100 are the standard, 400 have stamped curved blades. Both models feature countersunk screw holes, a pristine white powder coat finish, and the economical price that comes with using steel. Our curved blade Steel Supply Registers (400) simply provides a classier look, and a more even air pattern. The choice is yours to make.
TRUaire™ Wall/Ceiling Register, 2-Way, Series: 132, 12 x 4 x 1-3/4 in, 55 to 185 cfm, 30 sq-in Effective Area, 55 deg Deflection, 1/3 in Blade Spacing, Steel, White Powder Coated, Import
Market Price
$14.62
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$12.80
TRUaire's Floor and Baseboard Registers and Grilles simply complete your home's heating and cooling needs. We offer basic models, deluxe register models, and over-sized models with screw holes for mobile homes. All of TRUaire's floor and baseboard registers and grilles proudly feature our exclusive SmoothGlide Technology, 100 percent powder coated for rust and corrosion resistance, and an easy-open slotted face. Options include choice of fin design and spacing, and most models offer the choice of a pristine white or brown finish to fit your home, and of course, exceed expectations.
TRUaire™ Stamped Face Floor Register, Series: 150, 4 x 12 in, 2 in Overall Depth, 50 to 325 cfm, 34 sq-in, 55 deg Deflection, 1/2 in Blade Spacing, Steel, Brown Powder Coated, Import
Market Price
$31.57
TRUaire™ Adjustable Bar Type Supply Registers deliver high capacity airflow, with style, and solid construction. There are three different models to choose from, and all feature SmoothGlide™ Technology, pristine white powder coat finish, and recessed screw holes. All three also offer options. These include: choice of vertical or horizontal blade positioning, and a choice to add our exclusive SmoothGlide™ Multi-Shutter Damper, our SmoothGlide™ Opposed Blade Damper, or no damper at all.
TRUaire™ Ceiling/Sidewall Register, 1-Way, Series: 210 Series, 12 x 6 in, 5-1/2 in Duct Height, 13-3/4 in Overall Width, 2-1/4 in Overall Depth, Adjustable Vertical Blade, 150 to 760 cfm, 54 sq-in, 3/4 in Blade Spacing, Steel, Powder Coated, Import
Market Price
$20.64
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$15.67
Snap together design - Weather and fire resistant - UV stabilized - Rigid construction - Wider design allows for multiple linesets under one cover - Deeper profile allows thicker insulation
Market Price
$173.65
Outer dimensions: 63 inchs long - 30.375 inches wide - 4.25 inches deep - Inner dimensions: 56.875 inches long - 22.75 inches wide - 2.10 inches deep - Made of advanced polymer DexElar material - One piece pan has rolled edges with no seams - Strong enough to hang using one pair of steel support struts - Risers run the length of the pan - Each pan has indentations for placement of hanging brackets
Market Price
$11.30
TRUaire's Floor and Baseboard Registers and Grilles simply complete your home's heating and cooling needs. We offer basic models, deluxe register models, and over-sized models with screw holes for mobile homes. All of TRUaire's floor and baseboard registers and grilles proudly feature our exclusive SmoothGlide Technology, 100 percent powder coated for rust and corrosion resistance, and an easy-open slotted face. Options include choice of fin design and spacing, and most models offer the choice of a pristine white or brown finish to fit your home, and of course, exceed expectations.
TRUaire™ Stamped Face Floor Register, Series: 150, 4 x 10 in, 2 in Overall Depth, 50 to 300 cfm, 28 sq-in, 55 deg Deflection, 1/2 in Blade Spacing, Steel, Brown Powder Coated, Import
Market Price
$21.92
Weather resistant - Used for piping, duct runs, cable trays, and condenser wiring - 397 pounds maximum load capacity - Linear track holds 3/8 inch hex head bolts - Includes two 3/8 inch x 7/8 inch long bolts
Market Price
$42.27
Snap together design - Weather and fire resistant - UV stabilized - Rigid construction - Wider design allows for multiple linesets under one cover - Deeper profile allows thicker insulation
Market Price
$28.37
Novent Key Style locking caps were specifically designed to protect standard Schrader service valves on A/C units to help prevent leakage or misuse of refrigerant on residential and commercial equipment.
Novent® Universal Locking Refrigerant Cap, 1/4 in, Silver, Import
Market Price
$28.61
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$25.40
Market Price
$88.52
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$30.37
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$182.70
Disconnect Box with a pre-installed RSH-50 Surge Protector. Our RSH-50 is tabbed into the disconnect, to avoid any potential code violations with multiple wires being lugged in.
RectorSeal®, 96419, Surge Protective Device, Non-Fused Disconnect Box, 120/240 V AC Electrical Rating
Market Price
$19.26
Overview
PRO-Fit Quick Connect fittings are designed to connect refrigerant lines without an open flame, brazing, or swaging. They are suitable for joining refrigerant lines in seconds after cutting the line, deburring the ends, and push to connect.
Features
- Provides leak free connections for refrigerant lines without the need of an open flame, brazing, flaring or swaging.
- Join refrigeration lines in seconds by simply cutting the lines, deburring the ends, and push to connect.
- Patented leak-resistant, double O-ring & grip ring seal design for both CFC & HCFC refrigerants
- Heavy duty, corrosion & UV resistant brass body with sight window for connection verification
- Perfect for mini-split installations. PRO-Fit Quick Connects offer a time-saving, complete installation system covering line set sizes from 1/4" thru 7/8" in multiple configuration options - unions, elbows, reducers, elbow reducers, sockets & service
Market Price
$21.75
Not for use with ABS or CPVC - Lubricates and protects threads - For use with hot or cold potable water - Soft setting and slow drying - Immediate pressurization on pipe up to 2 inch diameter and 100 PSI - Lead free and contains no other metals - Allows easy pipe or fitting break with no damage to threads - For pressure up to 12,000 PSI in liquids and pressure up to 2,600 PSI in gases
Market Price
$176.65
Used to mount a mini split condenser on an inside or outside wall - Heavy duty steel with powder coat finish - 500 pound capacity - Sliding crossbar
Market Price
$14.58
TRUaire's Stamped Steel Supply Registers are made of quality steel, and feature our exclusive SmoothGlide Technology, which powder coats every piece, prior to assembly, something no other register and grille manufacturer offers in the industry. TRUaire offers two series model types; 100 are the standard, 400 have stamped curved blades. Both models feature countersunk screw holes, a pristine white powder coat finish, and the economical price that comes with using steel. Our curved blade Steel Supply Registers (400) simply provides a classier look, and a more even air pattern. The choice is yours to make.
TRUaire™ Wall/Ceiling Register, 2-Way, Series: 132, 12 x 6 x 1-3/4 in, 90 to 296 cfm, 47 sq-in Effective Area, 55 deg Deflection, 1/3 in Blade Spacing, Steel, White Powder Coated, Import
Market Price
$46.34
Old number MV4
Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Stepped collar for use with 6 inch, 7 inch, and 8 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
Market Price
$5.84
Used to internally attach linesets to the lineset duct - Weather and fire resistant - UV stabilized
Market Price
$13.67
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$36.51
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$36.56
Old number MV3S
Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Stepped collar for use with 4 inch, 5 inch, and 6 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
Market Price
$11.22
Snap together design - Weather and fire resistant - UV stabilized - Satin finish - Can be painted - Rigid construction
Market Price
$40.07
Snap together design - Weather and fire resistant - UV stabilized - Rigid construction - Wider design allows for multiple linesets under one cover - Deeper profile allows thicker insulation
Market Price
$18.38
Overview
PRO-Fit Quick Connect fittings are designed to connect refrigerant lines without an open flame, brazing, or swaging. They are suitable for joining refrigerant lines in seconds after cutting the line, deburring the ends, and push to connect.
Features
- Provides leak free connections for refrigerant lines without the need of an open flame, brazing, flaring or swaging.
- Join refrigeration lines in seconds by simply cutting the lines, deburring the ends, and push to connect.
- Patented leak-resistant, double O-ring & grip ring seal design for both CFC & HCFC refrigerants
- Heavy duty, corrosion & UV resistant brass body with sight window for connection verification
- Perfect for mini-split installations. PRO-Fit Quick Connects offer a time-saving, complete installation system covering line set sizes from 1/4" thru 7/8" in multiple configuration options - unions, elbows, reducers, elbow reducers, sockets & service
Market Price
$10.44
TRUaire's Return Air Grilles simply returns air to the furnace where it is filtered and either cooled or heated and then recirculates through the air supply grilles. We offer a variety of removable face, stamped, fixed bar, and fixed-hinged return air grilles for your convenience. Each return air grille will offer it's own set of unique options.
TRUaire™ Stamped Face Return Air Grille, 1-Way, Series: 173, 10 in W x 10 in H x 1/4 in THK, 143 to 332 cfm, 74 sq-in, 55 deg Deflection, 1/3 in Blade Spacing, Steel, White Powder Coated, Import
Market Price
$23.03
Overview
PRO-Fit Quick Connect fittings are designed to connect refrigerant lines without an open flame, brazing, or swaging. They are suitable for joining refrigerant lines in seconds after cutting the line, deburring the ends, and push to connect.
Features
- Provides leak free connections for refrigerant lines without the need of an open flame, brazing, flaring or swaging.
- Join refrigeration lines in seconds by simply cutting the lines, deburring the ends, and push to connect.
- Patented leak-resistant, double O-ring & grip ring seal design for both CFC & HCFC refrigerants
- Heavy duty, corrosion & UV resistant brass body with sight window for connection verification
- Perfect for mini-split installations. PRO-Fit Quick Connects offer a time-saving, complete installation system covering line set sizes from 1/4" thru 7/8" in multiple configuration options - unions, elbows, reducers, elbow reducers, sockets & service
Market Price
$9.36
Old number RCF16
16 inches on center - 9-1/4 inch hole - Designed for new construction - Flanges can be fastened to rough framing - Flange has a 3/8 inch lip that drops below the ceiling, requiring dry wall installers to cut the hole for you